Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 43
  1. #1
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822

    32 Ford continued

    Start of a new thread on works to the car, carried on from the existing thread in the Showfield.

    Offering up new headers and exhaust whilst the engines still in to see what needs to change.


    Looks like just a change of angle for the flange

  2. #2
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822
    To late to go back now.....

  3. #3
    Site Team
    Join Date
    Jun 2013
    Location
    United Kingdom Heathrowish.
    Posts
    3,273
    In deep!

  4. #4
    Might as well be part of the furniture.
    Join Date
    Jun 2013
    Location
    welwyn
    Posts
    1,377
    Not going to the A602's do on Sunday then

  5. #5
    Might as well be part of the furniture.
    Join Date
    Jun 2013
    Location
    Bucks
    Posts
    2,798
    The chain gang "hath pulleth"....

  6. #6
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822
    Quote Originally Posted by stilltrying View Post
    Not going to the A602's do on Sunday then
    The cars in disgrace after the trans breaking . I'm going in the daily ....again.

  7. #7
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822
    Up, up and away.


    She's out....


    Murder in the garage....when you forget to drain the trans oil
    AS the prop shaft came out so did all the oil!!! Rear seal totally fu**ed


    Scores on the slip yoke adding to leakage.


    Front seal also leaking!!!



    Convertor worn. Can this be used again? Not by me though need a higher stall.


    Its amazing how much you find wrong when taking an old car apart...... bell housing bolts just finger tight! and gearbox mount was not bolted to the actual box
    it was just sitting on the transverse bracket!

    Rear axle out next

  8. #8
    Might as well be part of the furniture.
    Join Date
    Jun 2013
    Location
    welwyn
    Posts
    1,377
    You could really upset the car by going manual and if racing then a lenco would sit nicely behind that monster motor you are building and then no auto trans fluid to worry about. Am I helping at all?

  9. #9
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822
    Rear axle out. Houser built - chassis engineering 5 bar linkage and adj shock mounts. Rear re-enforcing bar.
    Now got to have it blasted to clean off all the cr*p and weld on the wheelie bar mounts


    Aftermath of the weekends work. Need to clear some space....who said a double garage was big enough


    When removing the 3rd member the oil looked like metal soup...loads of particles suspended in it.
    Looks like it may have come from the teeth.

  10. #10
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    822
    Unboxed new half shafts.



    New rear discs to match fronts.

    New bearings don't have an O-ring!!! Bu**er, how do I stop the oil leaking out now?







    Axle casing and 5 bars back from Nigel at Enviroblast. What a difference.


    Last edited by fabphil; 26-09-17 at 07:32 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •