Page 24 of 24 FirstFirst ... 14 22 23 24
Results 231 to 232 of 232
  1. #231
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    1,287
    Back in the garage last night.

    Took it all out again!

    Loads of measuring, swearing, hammering.

    Its now all back

    Just got to tighten up all the nuts and fit the diagonal brace back in, re-check the pinion angle and wheelie bar clearance.
    Oh yes, and touch up all the chipped paint . This 2K stuff chips very easily, looks like I may have added to much harder when I mixed the paint.

  2. #232
    Might as well be part of the furniture.
    Join Date
    Jan 2014
    Location
    Outside the M25
    Posts
    1,287
    Tightened up all the nuts but couldn't get the diagonal brace to fit???
    Looks like an alignment problem somewhere. The left hand side is sitting high and is solid.

    I think I may have shortened the upper links too much and the rose joint is catching the upper front mounting and locked up.

    Couldn't be arsed to take it all apart again in this heat so went on the the wheelie bars.
    They seemed to mount up OK and I'm happy with the height.

    Just got to make a new brace as the bars are mounted further apart than the kit allows for due to the shock mountings being where they are.
    Just need a piece of 22mm OD tube 600mm long and a couple of nuts.


    Only just fits now
    Last edited by fabphil; 08-08-20 at 10:43 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •